Details
This is a replacement cartridge kit for the SoClean 2 CPAP Cleaner & Sanitizer. The kit includes a filter and a check valve. Both components need to be replaced about every six months to maintain effective and thorough CPAP sanitization.
- Replacement Filter Converts Enclosed Air to Regular Oxygen
- Check Valve Prevents Water From Harming Electronic Components
- Easy to Install
How to Change the Filter and the Check Valve
- Open the top lid of the SoClean 2.
- Remove the old filter by pulling it up and out.
- Throw away the old filter.
- Remove packaging from the new filter.
- Wipe off the exterior of the filter with a soft cloth.
- Place the new filter into the empty filter slot.
- Grab the barrel of the current check valve and pull the tubing away.
- Repeat to disconnect the other end of the tubing.
- Connect the replacement check valve. The direction is critical. The check valve is labeled with two arrows that should point toward the SoClean 2. Insert the stem of the new check valve as far as possible into the tubing. Repeat on the other side.
- Reset replace filter function by pressing and holding the "Hourglass" and "Manual" buttons until you see a smiley face on the screen.
- The machine is ready to use.
FAQ
How long does a SoClean Filter last?
Roughly every 6 months if it's used daily.
How do users know when to change the filter?
The LED display will read "Order Filter Kit."
Why does the filter and check valve need to be replaced?
New filters and valves are critical for the device to work effectively.
How do I reset the machine after replacing the filter?
Press and hold the "Hourglass" and "Manual" buttons at the same time. Only reset the machine after replacing the filter.
Specifications
Additional Information
UPC | 187293000761 |
---|---|
SKU | RC-CPAP077 |
MPN | No |